Difference between revisions of "RPiAIS"

From wiki.bastelbude.grade.de
Jump to: navigation, search
(setup)
Line 28: Line 28:
 
== install ==
 
== install ==
 
* connect via ssh or scp as pi
 
* connect via ssh or scp as pi
 
+
<pre>
 +
sudo su -
 +
apt-get update
 +
apt-get install git
 +
git clone git://git.osmocom.org/rtl-sdr.git
 +
apt-get install libusb-dev libusb-1.0 libtool cmake
 +
apt-get install build-essential
 +
 +
cd rtl-sdr/
 +
mkdir build
 +
cd build
 +
cmake ../
 +
make
 +
make install
 +
ldconfig
 +
 +
cd ..
 +
cp rtl-sdr.rules /etc/udev/rules.d/
 +
</pre>
 +
* Blacklist the kernel module dvb_usb_rtl28xxu by adding the line <code>blacklist dvb_usb_rtl28xxu</code> to <b>/etc/modprobe.d/raspi-blacklist.conf</b>
 +
* reboot
 
[[category:Projekte]]
 
[[category:Projekte]]

Revision as of 13:02, 13 October 2018

stretch

setup

  • connect via ssh or scp as pi
sudo apt-get update
sudo apt-get upgrade
sudo su
mc
  • enable root login over SSH
    • add to /etc/ssh/sshd_config
      PermitRootLogin yes
    • restart service
      sudo /etc/init.d/ssh restart
    • set root password
      sudo passwd root
  • set up static IP at /etc/dhcpcd.conf
interface eth0
static ip_address=192.168.1.110/24
static routers=192.168.1.1
static domain_name_servers=192.168.1.1
  • reboot

install

  • connect via ssh or scp as pi
sudo su -
apt-get update
apt-get install git
git clone git://git.osmocom.org/rtl-sdr.git
apt-get install libusb-dev libusb-1.0 libtool cmake
apt-get install build-essential
 
cd rtl-sdr/
mkdir build
cd build
cmake ../
make
make install
ldconfig
 
cd ..
cp rtl-sdr.rules /etc/udev/rules.d/
  • Blacklist the kernel module dvb_usb_rtl28xxu by adding the line blacklist dvb_usb_rtl28xxu to /etc/modprobe.d/raspi-blacklist.conf
  • reboot