Difference between revisions of "RPiAIS"
(→install) |
|||
Line 47: | Line 47: | ||
cp rtl-sdr.rules /etc/udev/rules.d/ | cp rtl-sdr.rules /etc/udev/rules.d/ | ||
</pre> | </pre> | ||
− | * Blacklist the kernel module dvb_usb_rtl28xxu by adding the line <code>blacklist dvb_usb_rtl28xxu</code> to <b>/etc/modprobe.d/ | + | * Blacklist the kernel module dvb_usb_rtl28xxu by adding the line <code>blacklist dvb_usb_rtl28xxu</code> to <b>/etc/modprobe.d/blacklist-dvb_usb_rtl28xxu.conf</b> |
* reboot | * reboot | ||
[[category:Projekte]] | [[category:Projekte]] |
Revision as of 13:09, 13 October 2018
stretch
- get http://www.aishub.net/rpiais
- enable SSH permanently
- check http://192.168.1.100:8080
setup
- connect via ssh or scp as pi
sudo apt-get update sudo apt-get upgrade sudo su mc
- enable root login over SSH
- add to /etc/ssh/sshd_config
PermitRootLogin yes
- restart service
sudo /etc/init.d/ssh restart
- set root password
sudo passwd root
- add to /etc/ssh/sshd_config
- set up static IP at /etc/dhcpcd.conf
interface eth0 static ip_address=192.168.1.110/24 static routers=192.168.1.1 static domain_name_servers=192.168.1.1
- reboot
install
- connect via ssh or scp as pi
sudo su - apt-get update apt-get install git git clone git://git.osmocom.org/rtl-sdr.git apt-get install libusb-dev libusb-1.0 libtool cmake apt-get install build-essential cd rtl-sdr/ mkdir build cd build cmake ../ make make install ldconfig cd .. cp rtl-sdr.rules /etc/udev/rules.d/
- Blacklist the kernel module dvb_usb_rtl28xxu by adding the line
blacklist dvb_usb_rtl28xxu
to /etc/modprobe.d/blacklist-dvb_usb_rtl28xxu.conf - reboot